Honeywell 7800 SERIES Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 64

Honeywell 7800 SERIES Скачать руководство пользователя страница 49

7800 SERIESS7800A2142 4-Line LCD Keyboard Display Module

49

32-00110-07

• Postpurge time (if applicable)

• Valve proving (VP) when option setting (if applicable)

• Valve proving (VP) time (if applicable)

• Manufacturing code

• Software revision

• Reset count (number of times the module has reset due to an internal fatal error)

• Reset reason code of most recent internal fatal error

Terminals are displayed with their model use, e.g., T6 may be used as a “Demand” or

“Operating control” terminal.

Fig. 78. Burner control diagnostics

The up and down arrow buttons are used to scroll the status lines. The left arrow button is

used to exit the page and return back to the Home page.

Annunciator Diagnostics

Diagnostic information about the annunciator can be viewed on the display module when

an annunciator is connected in the system (see Fig. 79). If an annunciator is not connected,

this information is not accessible. The following information is displayed:
• Annunciator status

• T4-T22 terminal status – “ON” or “OFF”

• Fault (“first out”) code

• Software revision

The assigned terminal names display for the T4-T22 terminals.

Fig. 79. Annunciator diagnostics

The up and down arrow buttons are used to scroll the status lines. The left arrow button is

used to exit the page and return back to the Home page.

Display Diagnostics

Diagnostic information about the display module can be viewed on a diagnostics page (see

Fig. 80). The following information is displayed:
• Manufacturing code (when the display was built)

• Display software version

• Internal temperature (inside the display)

«
...
47
48
49
50
51
...
»

Содержание 7800 SERIES

































































Отзывы:

Нет отзывов