Honeywell 6824, Руководство пользователя

Страница: 85 / 98

Appendix B – Printer Control Codes
6824 Mobile Full Page Printer User Manual 75
Set Vertical Tabs
Description: Sets the vertical tabs based on the current line spacing. Cancels any previously set
vertical tabs. All tab settings with this control code are stored in channel 0. Tab settings
are not affected by subsequent changes in line spacing.
Parameters are as follows:
•
n1 is the first tab. Range is 1 to 255.
•
n2 is the second tab. All tabs must be listed in ascending order.
•
... are subsequent tabs. Maximum number of tabs is 16.
•
nk is the last tab set. Any value less than the previous tab value acts as a terminating
character.
•
NUL is the terminating character.
Decimal: 27 66 n1 n2 ... nk 0
Hex: 1B 42 n1 n2 ... nk 00
ASCII: ESC “B” n1 n2 ... nk NUL
Clear Vertical Tabs
Description: Use this variant of the Set Vertical Tabs control code to clear all vertical tab stops.
Decimal: 27 66 0
Hex: 1B 42 00
ASCII: ESC “B” NUL
Set Vertical Tabs in Channel
Description: Sets vertical tabs based on the current line spacing, and stores the tabs in a specified
channel. Cancels previously set vertical tabs. Specify the channel using the Select
Vertical Tab Channel control code.
Parameters are as follows:
•
c is the channel number. Range is 0 to 7.
•
n1 is the first tab. Range is 1 to 255.
•
n2 is the second tab. All tabs must be listed in ascending order.
•
... are subsequent tabs. Maximum number of tabs is 16.
•
nk is the last tab set. Any value less than the previous tab value acts as a terminating
character.
•
NUL is the terminating character.
Decimal: 27 98 c n1 n2 ... nk 0
Hex: 1B 62 c n1 n2 ... nk 00
ASCII: ESC “b” c n1 n2 ... nk NUL
Clear Vertical Tabs in Channel
Description: Use this variant of the Set Vertical Tabs in Channel control code to clear all vertical tab
stops in the specified channel.
c is the channel number to be cleared of vertical tab stops
Decimal: 27 98 c 0