Honeywell 6150 - Ademco Fixed - Display Keypad, Руководство пользователя

Страница: 20 / 48

Bypassing Protection Zones
–
20
–
Using the
6
BYPASS Key
This key is used when you want to arm your system with one or more zones
intentionally unprotected. The system must be disarmed first.
When bypassing zones:
•
The system will not allow fire zones to be bypassed.
•
All bypasses are removed when an OFF sequence (security code plus OFF) is
performed.
•
Bypassed zones are unprotected and will not cause an alarm if violated while
your system is armed.
1. Enter your security code and press the BYPASS key.
2. Enter zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.). Single
digit zone numbers must be preceded by a zero (e.g. 05, 06) .
3. When finished, the keypad will display a "Bypass" message along with each by-
passed zone number, accompanied by a beep for each. Wait for these zones to be
displayed, to confirm their bypass.
4. Arm the system as usual.
TYPICAL MOMENTARY DISPLAY
OF BYPASSED ZONE
0 3
BYPASS
AC AC
4110-001-V0
FIXED-WORD