BATTERY INSTALLATION/REPLACEMENT
1. Remove the transmitter's cover
(if it is not already
off) as described in
MOUNTING Step 1.
2. Observe correct polarity and insert the battery
provided into the battery holder (see Fig. 2).
Take
care not to bend the antenna.
NOTE:
Replace
battery
only with:
Panasonic CR123A, Duracell DL123A, or
ADEMCO
466.
3. To replace the cover,
engage the hooks along one
edge and snap shut.
SPECIFICATIONS
Dimensions:
1-1/2"W x 3"H x 7/8"D
(38mm x 76mm x 22mm)
Battery:
3V Lithium (see
Note in step 2 of BATTERY
INSTALLATION/REPLACEMENT)
BATTERY CAUTION
: Risk of fire,
explosion, and burns. Do not recharge, disas-
semble, heat above 212°F (100°C), or in-
cinerate. Dispose of used batteries promptly.
Keep away from children.
TO THE INSTALLER
Regular maintenance and inspection (at least annually) by the installer and frequent testing by the user are vital to
continuous satisfactory operation of any alarm system.
The installer should assume the responsibility of developing and offering a regular maintenance program to the user,
as well as acquainting the user with the proper operation and limitations of the alarm system and its component parts.
Recommendations must be included for a specific program of frequent testing (at least weekly) to insure the system's
operation at all times.
REFER TO THE INSTALLATION INSTRUCTIONS FOR THE RECEIVER/CONTROL WITH WHICH THIS DEVICE
IS USED, FOR DETAILS REGARDING LIMITATIONS OF THE ENTIRE ALARM SYSTEM.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules and RSS210 of Industry Canada. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2), this device must accept any
interference received, including interference that may cause undesired operation.
Unauthorized changes or modifications could void the user's authority to operate the equipment.
For the latest warranty information, please go to:
http://www.security.honeywell.com/hsc/resources/wa/index.html
ÊK5503V2EŠ
K5503V2 4/08 Rev. A
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
Copyright
2008
Honeywell
International Inc.
