MOUNTING:
1. Determine first if wall mounting or floor mounting is desired and then position the safe in the
location you would like to mount it in and open the safe door.
2. Carefully remove the mounting hole cover plugs using a flat-head screwdriver (Figure 1).
3. Place a pencil inside the 2 holes and mark the surface for drilling (Figure 2).
4. Remove safe so that you can see the markings you made and then using a drill with a 14mm bit,
drill each hole to a depth of 45mm and remove any excess dust. (Figure 3).
5. Re-position safe over holes and insert the anchor bush with bolt and tighten (Figure 4).
6. Replace the mounting hole cover inside of safe over the 2 holes used (Figure 5).
Figure 1
Figure 2
Figure 4
Figure 3
Figure 5
3
ANCHORING YOUR SAFE
You may mount your safe for added theft protection and resistance to tipping. 4 pre-drilled bolt-down
holes provide the option of wall or floor mounting. Includes hardware for securing to concrete surfaces
for maximum protection. If you desire to bolt the safe to other surface types such as wood or metal,
additional hardware would be needed. Check with your local home center.
NOTE: Bolting/unbolting of the unit is at the consumer’s expense and discretion. LH Licensed
Products is not responsible for any costs incurred if the unit is to be replaced.
If you have any questions about mounting the safe, please check with your local home center/
hardware retailer or independent contractor.
CARE AND MAINTENANCE
When properly maintained, your safe will continue to operate for many years. In order to ensure
optimum performance of your safe, please follow these simple precautions:
CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner
(e.g., window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER
use abrasive cleansers on the safe or digital keypad.
MOISTURE – We recommend that you place delicate items such as pictures or intricate jewelry
into an air-tight container before storing them in your safe. Avoid placing your safe in areas of high
humidity. For optimum performance, the safe should be opened and aired out for at least 20 minutes
every two weeks.
For future reference, store this Operation and Installation Guide in a secure area away from the safe.
DO NOT DISCARD!
