manualshive.com logo in svg
background image

19

LIMITED LIFETIME WARRANTY

Subject to the limitations set forth below, Hong Kong China Electric appliance Company (HKC) warrants 

the fan motor for this ceiling fan to be free from defects in workmanship and material for the life of the 

product.  Also, subject to the limitations below, HKC warrants all ceiling fan parts (“ceiling fan parts” 

excludes the motor and parts made in whole or in part with glass) to be free from defects in workmanship 

and material for a period of one year after the date of purchase by the original purchaser at retail.  

All claims must be made by the original purchaser, whether such purchaser purchased the product through a 

store or contractor.  Ceiling fan part defects must be reported within the first year from the date of purchase. 

Parts made in whole or in part with glass and the finishes of metal and other surfaces are not warranted. 

Purchasers are responsible for all costs of removing and reinstalling the product. Any damage to any 

part caused by ordinary wear and tear, accident, misuse, or improper installation, is not covered by this 

warranty. HKC assumes no responsibility whatsoever for fan installation. Any service performed by a non-

licensed electrician will render the warranty invalid.

HKC’s sole responsibility shall be to repair or replace the motor, parts, or product within the terms stated 

above.  HKC SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING 

ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING DIRECTLY OR INDIRECTLY, 

FROM ANY BREACH OF WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS 

PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 

CONSEQUENTIAL DAMAGES SO THIS LIMITATION MAY NOT APPLY TO YOU.

IF THE ORIGINAL PURCHASER CEASES TO OWN THE FAN, THIS WARRANTY IS VOIDED. 

Should the purchaser encounter a problem with your fan related to defects in workmanship or materials 

within the warranty period associated with the defective part, HKC agrees to replace the defective part 

without charge, or at its option, to replace the ceiling fan with a comparable or superior model.

HKC’S WARRANTIES ARE LIMITED TO THE WRITTEN WARRANTIES SET OUT IN THIS HKC 

CEILING FAN LIMITED LIFETIME WARRANTY.  ALL OTHER EXPRESS AND IMPLIED WARRANTIES, 

INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR 

PURPOSE AND THE IMPLIED WARRANTY OF MERCHANTABILITY ARE DISCLAIMED.  SOME 

STATES DO NOT ALLOW THE DISCLAIMER OF IMPLIED WARRANTIES, SO THIS DISCLAIMER MAY 

NOT APPLY TO YOU.

To obtain warranty service, please write down your model number and call Customer Service at 
1-877-361-3883

Monday - Thursday, 8 am - 6 pm, EST and Friday, 8 am - 5 pm, EST. Please have 

a copy of the receipt as proof of purchase. 

The Honeywell Trademark is used under license from Honeywell International 

Inc. Honeywell International Inc. makes no representations or warranties with 

respect to this product.  This product is manufactured for: 

Hong Kong China Electric Appliance Manufacture Co., Ltd. 

3059 Forest Hill Irene Rd, Suite 103 

Germantown, TN 38138 

1-877-361-3883

9081-EN

 

r030714

Содержание 50203




















Отзывы: