Honeywell 5 Nm Series, Данные о продукции

Страница: 1 / 8

PRODUCT DATA
63-2632-03
5 Nm, 10 Nm Series
NON-SPRING RETURN DIRECT-COUPLED
DAMPER ACTUATORS FOR FLOATING AND
TWO-POSITION CONTROL
GENERAL
This non-spring return direct-coupled damper actuator
provides floating and two-position control for:
• air dampers,
• VAV units,
• air handlers,
• ventilation flaps,
• louvers, and
• reliable control for air damper applications with up to
10 sq ft (0.9 sq m) / 44 lb-in. (5 Nm) and 20 sq ft (1.9 sq m)
/ 88 lb-in. (10 Nm) (seal-less damper blades; air friction-
dependent).
FEATURES
• Declutch for manual adjustment.
• Adjustable mechanical end limits.
• Removable access cover for direct wiring.
• Mountable in any orientation.
• Rotation direction and service/OFF switch.
• Available with cable on select models.
SPECIFICATIONS
Supply voltage:
MN6105/MN6110: 24 Vac/Vdc -15%/+20%, 50/60 Hz.
Nominal voltage:
MN6105/MN6110: 24 Vac/Vdc, 50/60 Hz.
All values stated herein after apply to operation under nominal
voltage conditions.
Power consumption:
MN6105/MN6110: 5 VA / 2 W.
Ambient limits:
Ambient operating limits: -5...+140° F (20...+60° C).
Ambient storage limits: -22...+176° F (-30...+80° C).
Relative humidity: 5...95%, non-condensing.
Safety:
Protection standard: IP54.
Protection class: II as per EN 60730-1.
Overvoltage category: II.
Lifetime:
Full strokes: 60000.
Repositions: 1.5 million.
Contents
General ............................................................................. 1
Features ........................................................................... 1
Specifications ................................................................... 1
Ordering Information ........................................................ 2
Installation ........................................................................ 3
Wiring ............................................................................... 4