Honeywell 26079, Руководство пользователя

Страница: 37 / 50

4 - 3
Automatic Scanning
Enable Automatic scan mode to activate the ring scanner for automatic scanning that does not require the operator to
press the trigger for each bar code presented in the field of view of the ring scanner. The scanner automatically starts scan-
ner after a specified timeout (Automatic Interval).
1. Open the Scan Demo .
2. Scan Demo notifies the user that multiple scanners have been detected and tells you which scanner is the current
scanner. Touch OK. If the ring scanner (8620XXX) is not the current scanner, select it in Settings, Scanners .
3. Swipe left or touch Settings, and then select Scan .
4. Change the Scan Mode to Automatic .
5. Use the slider adjustment under Automatic Interval to set the number of seconds (0 to 30) between scan attempts.
6. Press the Back button to return to the Scan screen.
7. Press the trigger on the ring scanner to activate the scanner. Once activated, the ring scanner automatically scans and
decodes bar codes presented in the field of view based on the Automatic Interval set.
To disable the feature set the Scan mode back to Normal .
Continuous Scanning
Enable Continuous scan mode to activate the ring scanner for continuous scanning when you press and hold the trigger.
1. Open the Scan Demo .
2. Scan Demo notifies the user that multiple scanners have been detected. It automatically selects the ring scanner
(ARSxx). Touch OK .
Swipe left or select Settings to
adjust scan options, symbology
types, and profiles.
Decode Results
Scan Statistics
See
Configuring the Scan Demo
Application on page 4-4 .
Touch to clear scan results.