4
Checking Batteries
English
• Safe will not open with your
personal code:
Open the safe using the override key
and re-program your code.
• No LED Lights:
Remove the override lock cover and
open safe with the override key. Refer
to checking/changing batteries.
If you continue to experience problems
or have questions regarding your safe,
please contact Sisco customer service
at 800-223-8566. Do not return safe
to the retailer unless instructed to do so
by Customer Service Representative.
Thank you!
Troubleshooting
On the digital keypad, press the “B” but-
ton.
• If the red LED light flashes, change the
batteries within 2 months.
• If no LED lights, change the batteries
immediately.
Changing Batteries
Changing batteries will not erase your
personal code.
1. Open the safe door using your personal
code and locate the battery compartment
on the lower inside portion of the door.
2. Push in on the left side of the cover and
remove by sliding to the right (Fig. 6)
3. Carefully replace the batteries (4 -”AA”)
using the positioning guide printed on the
inside of the battery compartment.
4. Replace the cover by sliding back into
position.
Appropriate Use of
Your Safe
• Your Anti-Theft safe is designed to
provide protection against theft and
minimal fire damage. It does not
protect the contents from serious fire
or water damage.
• For information on safes that provide
protection from fire and water
damage, see your Home Security
retailer or visit our website at
www.honeywellsafes.com
5
English
Ordering keys for your safe
Limited product warranty
LIMITED WARRANTY: If your safe fails to operate because of a manufacturing defect, any time
up to five (5) years from the date of original purchase, we will, at our discretion, repair or
replace the unit at no charge to the original owner provided you return the product, shipping
prepaid, to SISCO, or to a service center or locksmith of our choice.
WHAT IS NOT COVERED: This warranty does not apply if the product has been damaged by
improper installation, neglect, accident, misuse, exposure to extremes of heat or humidity, ter-
rorism, war, acts of God, or as a result of service or modification by other than an authorized
service center. Sisco is not responsible for any costs associated with removing or installing this
product. This warranty does not apply to the finish of any metal portions of the product. No
other expressed warranty is given. The repair or replacement of the product is your exclusive
remedy. Any implied warranty of salability or fitness is limited to the duration of this written
warranty. Some states do not allow limitations on how long an implied warranty lasts, so the
above limitations may not apply to you. In no event shall SISCO be liable for consequential or
incidental damages. Some states do not allow the exclusion or limitation of incidental or con-
sequential damages, so the above limitation or exclusion may not apply to you. This warranty
gives you specific rights and you may also have other rights which vary from state to state.
Honeywell makes no representations or warranties with respect to this Product or service, The
Honeywell Trademark is used under license from Honeywell Intellectual Properties Inc. by SISCO.
In the U.S., replacement keys can be ordered at a
cost of $6.95 each. Credit card orders can be accept-
ed by phone. Checks or money orders should
be made payable to Sisco.
Payment Type / Shipping Time
• Credit card:
3 business days
• Money orders/cashiers check:
3 business days from receipt
• Personal/business check:
14 business days from receipt
The following information will be needed to process
your request: IMPORTANT: Do not send cash!
• Name/address
• Telephone number
• E-mail address if available
• Model # of Safe
• Number of keys requested
• Key number (located on lock tumbler)
• Payment or credit card number
Please send checks or money orders to:
SISCO c/o Keys Request
2835 E. Ana St. Rancho Dominguez, CA 90221-5601
