manualshive.com logo in svg

Honeywell 16100 Series, Руководство пользователя, Страница: 5 / 7

Поделиться
Скачать
Honeywell 16100 Series Скачать руководство пользователя страница 5

Filter change schedule (depending upon use and conditions):

– Odor-Lock™ filter: Replace every 3-6 months depending on use

– HEPA filter: Replace every 1-3 years depending on use

Upon start up of your Air Cleaner and every Odor-Lock™ filter replacement, roll the
Monthly Filter Change Calendar ahead 3-6 months to indicate when filter replacement is
necessary.

Upon start up of your Air Cleaner and upon every HEPA filter replacement, roll the 
HEPA Filter Change Calendar ahead 1 to 3 years to indicate when filter replacement is
necessary.

NOTE:

Changing the Filter Replacement Reminder wheels can only be accomplished by

removing the back grille from the front housing. The filter replacement month and year are
displayed through the two windows on the top of the control panel.

Filter Replacement Reminders

Step 1:

Turn the Air Cleaner OFF (    ) and unplug from the power supply.

Step 2:

To open back grille, place your fingers on the two tab indentations
at the top of the unit just behind the calendar wheel window area and gently 
push down and release the grille (Fig. 1). Completely remove back grille 
from unit.

Step 3:

Remove HEPA and Odor-Lock™ filter assembly from the unit.

Step 4:

Remove the Odor-Lock™ filter from the HEPA filter (Fig. 2).

Step 5:

Replace the filter(s) as needed, and discard used filter(s).

Step 6:

Attach the Odor-Lock™ filter to the HEPA filter using the fasteners that are pre-
attached to the HEPA filter.

NOTE: When placing the filter assembly back in the unit, make sure that the 
surface of the HEPA filter that contains the foam sealant material is against 
the plastic divide (Fig. 3, Fig. 4).

Step 7:

Before reattaching the back air cleaner grille, set appropriate filter change 
calendar(s) ahead according to the schedule provided (Fig. 4).

Step 8:

To reattach the back air cleaner grille, insert the tabs on the bottom of the 
back grille into slots on the bottom of the unit base. Next, insert the side tabs on 
the back grille with the slots on the side of the unit. Then, push down firmly on 
top tabs, insert and lock in place.

Step 9:

Plug into a wall outlet.

Содержание 16100 Series








Отзывы:

Нет отзывов