Honda WDP30X, Инструкция по эксплуатации

Страница: 57 / 75

9-2
Date of Issue: April 2008
WDP30X
• CRANKSHAFT BEARING
ASSEMBLY:
Oil the circumference of the bearing, and install the bearing
with the following special tools.
Driver 07749-0010000
Attachment, 52 x 55 mm 07746-0010400
Pilot, 22 mm 07746-0040100
• TIMING GEAR/GOVERNOR DRIVE GEAR
DISASSEMBLY:
Mark a line on the crankshaft and timing gear.
Set a commercially available bearing puller plate on the
bottom part of the governor drive gear, and remove the
crankshaft and timing gear using a hydraulic press.
Remove the governor drive gear in the same way.
ASSEMBLY:
• TIMING GEAR
Using the old gear for reference, make a mark at the same
position on the new gear.
Using a hydraulic press, driver, and attachment (special
tools), press the new gear onto the crankshaft.
Driver, 40 mm I.D. 07746-0030100
Attachment, 25 mm I.D. 07746-0030200
• GOVERNOR DRIVE GEAR
Use a hydraulic press and the special tools shown below to
press in a new governor drive gear.
Driver, 40 mm I.D. 07746-0030100
Attachment, 30 mm I.D. 07746-0030300