Honda TRX680FA, Руководство пользователя, Страница: 130 / 242

−
−
25 N·m (2.5 kgf·m , 18 lbf·ft)
2.9 (3.1 US qt , 2.6 Imp qt)
(7)
(6)
(6) drain plug sealing washer
(7) O-ring
121
Engine Oil & Filter
Servicing Your Honda
Improper disposal of drained f luids is harmf ul to the environment.
Add Engine Oil:
Pour the drained oil into a suitable container and dispose of it in an
approved manner (page
).
Check that the drain plug sealing washer ( ) and O-ring ( ) are in
good condition. If necessary, replace them.
Apply a thin coat of engine oil to the O-ring.
Reinstall the engine oil drain plug and tighten it to the specified
torque:
Fill the crankcase with the recommended grade oil approximately:
Reinstall the oil filler cap.
Start the engine and let it idle for 3
5 minutes.
Stop the engine, wait 2 3 minutes and check the oil level. Make sure
the oil is between the upper and lower level marks on the dipstick. If
necessary, add more oil but do not overfill.
If a torque wrench is not used for installation, see your Honda dealer as
soon as possible to verify proper assembly.
Reinstall the oil filler cap and dipstick.
Check that there are no oil leaks.
9.
10.
12.
11.
180
13.
14.
15.
16.
17.
18.
7 6
０８／０８／１９ １６：２１：４６ ３２ＨＮ８６６０ ０１３０