ALTERNATOR/STARTER CLUTCH
11-4
STATOR REMOVAL
Remove the following:
–
Left front side cowl (page 2-9)
–
Under cowl (page 2-13)
–
ECM (page 5-77)
–
Heat guard plate mounting bolt (page 2-23)
–
Drive sprocket cover (page 7-4)
Remove the bolt, bolt/washer, nut and trim clip
(XL700VA only).
Remove the ECM stay.
Release the wire harness from the wire band and
harness clamp.
Disconnect the alternator 3P (Natural) connector.
Release the alternator wire from the wire guide.
Remove the reserve tank mounting bolt and move
the reserve tank slightly.
Alternator wire pass through the between reserve
tank and frame.
STAY
NUT
CLIP
(XL700VA)
BOLT/WASHER
BOLT
3P (NATURAL) CONNECTOR
WIRE BAND
HARNESS CLAMP
WIRE GUIDE
ALTERNATOR WIRE
BOLT
ALTERNATOR WIRE
