−
If your vehicle’s battery is
disconnected or goes dead, or a front
window fuse is removed, the AUTO
function is disabled. The power
window system needs to be reset
after reconnecting the battery or
installing the fuse.
Start the engine. Push down and
hold the front window switch until
the window is fully open.
Pull and hold the front window
switch to close the window
completely, then hold the switch
for a second or two more.
If the power windows do not operate
properly after resetting, have your
vehicle checked by your dealer.
If either front window runs into any
obstacle while it is closing
automatically, it will reverse
direction, and then stop. To close the
window, remove the obstacle, then
use the window switch again.
Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.
To open/close either front
window, push the window switch
firmly down or pull back on to the
second detent, and release it. The
window will automatically go up or
down all the way. To stop the
window, pull/push on the window
switch briefly.
1.
2.
Power Windows
Auto Reverse
AUTO
108
