g
Press the alarm button to select from 3
sensitivity levels.
3 alarm rings: high sensitivity
2 alarm rings: middle sensitivity
1 alarm ring: low sensitivity
The Honda SMART Key indicator and
ignition switch ring come on while setting.
h
Wait for about 10 seconds until the ignition
switch ring starts blinking. The sensitivity
level is set.
i
Remove the EM mode coupler from the EM
mode connector to finish setting.
u
The sensitivity level is also set if you
remove the EM mode coupler before the
ignition switch ring starts blinking.
j
Store the EM mode coupler on the battery
cover. Reinstall the parts in reverse order.
#
If the Anti-Theft Alarm System Does
Not Operate Properly
If any of the following situations arise, the
battery (
P. 76) in the motorcycle may be
discharged or there is a system problem.
Remove the battery and see your dealer.
The alarm does not ring.
The alarm rings but fades out.
The alarm system does not stop.
20181019183311_31K0GA000_enu_BOOK Page 44 Friday, October 19 2018 18:39:26 JST
Operation Guide
41
