Honda ST1300 2007, Руководство пользователя

Страница: 123 / 221

− − 0.031 0.035 in (0.80 0.90 mm)
side electrode
spark plug gap
116
Spark Plugs
Servicing Your Honda
Improperly tightened spark plugs can damage the engine. If a plug is too loose,
a piston may be damaged. If a plug is too tight, the threads may be damaged.
Inspect the electrodes and center porcelain for deposits, corrosion, or carbon
fouling. If the corrosion or deposits are heavy, replace the plug. Clean a
carbon or wet-fouled plug with a plug cleaner, if available, or a wire brush.
Check the spark plug gap using a wire-type feeler gauge. If adjustment is
necessary, bend the side electrode carefully.
The gap should be:
With the plug washers attached, thread the spark plugs in by hand to prevent
cross-threading.
Tighten each spark plug:
If the old plug is good:
1/8 turn after it seats.
If installing a new plug, tighten it twice to prevent loosening:
First, tighten the plug:
NGK:
turn after it seats.
DENSO: turn after it seats.
Then loosen the plug.
Next, tighten the plug again:
1/8 turn after it seats.
Reinstall the spark plug caps. Take care to avoid pinching any cables or wires.
Reinstall the right and left overhead covers and maintenance lids.
6.
7.
8.
9.
a)
b)
c)
1/2
10.
11.
1
０６／１１／２４ １２：１４：０７ ３１ＭＣＳ６４０ ０１２３