background image

Maintenance Fundamentals

59

Mai
ntenance

You should also perform other periodic 
maintenance checks at least once a month 
regardless of how often you ride, or more 
often if you ride frequently.
Also, check the odometer reading against 
the Maintenance Schedule and perform all 
maintenance that is due. 

2

P. 56

Periodic Checks

Tires and wheels

Check the air pressure, examine tread for wear and damage 
(

2

P. 65), and check the wheels for damage.

Fluid levels

Check the engine oil level (

2

P. 72), engine coolant level (

2

P. 74), 

clutch fluid level (

2

P. 80), and brake fluid level (

2

P. 75).

Lights

Check that the headlight, brake light, taillight, turn signals and 
license plate light are working properly.

Controls

Check the throttle grip (

2

P. 81), clutch lever, front brake lever, 

and rear brake pedal.

Drive chain

Check the slack (

2

P. 78), adjust the slack (

2

P. 79), and lubricate 

(

2

P. 64) as needed.

Fuses

Check that you have a full supply of spare fuses.

Nuts & bolts

Check the major nuts and bolts, and tighten as needed.

Содержание RC1000VS






























































































































Отзывы: