Honda Odyssey 1995, Руководство пользователя

Страница: 218 / 240

Anti-lock Brake System
The Anti-lock Brake System (ABS)
is standard equipment on all U.S.
models and the Canadian six-
passenger model. It is optional on the
Canadian seven-passenger model.
The ABS works by measuring how
fast the wheels are turning during
braking and comparing their speed.
If any wheel is rotating much slower
than the others (on the verge of
locking up and skidding), the system
reduces hydraulic pressure to that
wheel's brake caliper. When that
wheel's speed matches the other
wheels, the system applies normal
hydraulic pressure. This can take
place several times per second at
each wheel. You feel the ABS
working as rapid pulsations in the
brake pedal.
Each wheel has a wheel speed
sensor assembly. As the wheel
rotates, the sensor sends electrical
pulses to the ABS control unit. The
pulse frequency varies with the
wheel speed.
The electrical output of the ABS
control unit is connected to the
modulator/solenoid unit. During
braking, the ABS control unit
monitors the pulse frequencies from
the four wheels. When the control
unit detects a wheel locking up, it
energizes the appropriate solenoid in
the modulator/solenoid unit. There
are six solenoids: two for each front
wheel, and two for the rear wheels.
The energized solenoid reduces
hydraulic pressure to one side of a
modulator valve. This, in turn,
reduces hydraulic pressure in the
brake line going to the affected
wheel. When that wheel speeds up
because of the reduced braking
effort, the control unit de-energizes
the solenoid. This builds hydraulic
pressure on the modulator valve.
The pressure increases in the
hydraulic line to the wheel.
For the system to react quickly, the
modulator/solenoid unit must have
brake fluid under high pressure.
This is supplied by a piston-type
accumulator that is pressurized by
an electric pump. A pressure-sensing
switch on the accumulator controls
this pump.
The control unit also contains error
detection circuitry. It monitors the
operation of the wheel sensors,
solenoids, pump, and electronics. If
the control unit detects any faults, it
shuts off power to the pump motor
and solenoids. The light on the
instrument panel comes on. The
brakes then work like a conventional
system without anti-lock capabilities.
Technical Information
Main Menu Table of Contents
▲ ▼