Adding Coolant
If the coolant level is below the LOWER level
mark, add the recommended coolant
P. 80) until the level reaches the UPPER
level mark.
Add fluid only from the reserve tank cap and
do not remove the radiator cap.
1.
Pull the floor mat off.
2.
Remove the reserve tank lid by using a
flat head screwdriver covered with a
protective cloth.
3.
Remove the reserve tank cap and add
fluid while monitoring the coolant level.
u
Do not overfill above the UPPER level
mark.
u
Make sure no foreign objects enter the
reserve tank opening.
4.
Securely reinstall the reserve tank cap.
5.
Install the reserve tank lid.
6.
Install the floor mat.
3
WARNING
Removing the radiator cap while the
engine is hot can cause the coolant to
spray out, potentially scalding you.
Always let the engine and radiator cool
down before removing the radiator cap.
20180803173345_32K40L220_eng_BOOK Page 96 Friday, August 03 2018 17:38:27 JST
Coolant
u
Adding Coolant
Maintenance
93
Reserve tank cap
Reserve tank lid
Floor mat
Cloth
Screwdriver