Honda NM4 2018, Руководство пользователя

Страница: 104 / 165

6.
Turn both adjusting bolts an equal
number of turns until the correct drive
chain slack is obtained. Turn the adjusting
bolts counterclockwise to tighten the
chain. Turn the adjusting bolts clockwise
and push the rear wheel toward the front
to provide more slack. Adjust the slack at
a point midway between the front
sprocket and the rear wheel sprocket.
Check the drive chain slack.
2
P. 98
7.
Check rear axle alignment by making sure
the end of the chain adjusting plate aligns
with the scale graduations on both
sides of the swingarm. Both marks should
correspond. If the axle is misaligned, turn
the right or left adjusting bolt until the
marks are aligned and recheck chain
slack.
8.
Tighten the rear axle nut.
Torque: 72 lbf·ft (98 N·m, 10.0 kgf·m)
9.
Hold the adjusting bolts and tighten the
lock nuts.
Torque: 15 lbf·ft (21 N·m, 2.1 kgf·m)
10.
Recheck drive chain slack.
11. Return the muffler to its original position.
2
P. 121
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Drive Chain
u
Adjusting the Drive Chain Slack
Maintenance
100