Honda NC700 2012, Руководство по обслуживанию

Страница: 695 / 773

20-14
dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
4. Logic Ground Line Open Circuit Inspection
Turn the ignition switch OFF.
Remove the jumper wire from the ABS modulator
25P connector [1].
Check for continuity between the ABS modulator
25P connector of the wire harness side and ground.
Is there continuity?
YES – GO TO STEP 5.
NO – Open circuit in Green/yellow wire
5. Fuse Inspection
Check the ABS fuse 7.5 A (ABS MAIN) [1] in the
fuse box for blown.
Is the fuse blown?
YES – GO TO STEP 6.
NO – GO TO STEP 7.
6. Power Input Line Short Circuit Inspection
With the ABS fuse 7.5 A (ABS MAIN) removed,
check for continuity between the ABS modulator
25P connector [1] of the wire harness side and
ground.
Is there continuity?
YES – Short circuit in Red/black wire. Replace
the ABS fuse 7.5 A (ABS MAIN) with a
new one, and recheck.
NO – Intermittent failure. Replace the ABS fuse
7.5 A (ABS MAIN) with a new one, and
recheck.
Connection: Green/yellow – Ground
TOOL:
Test probe
07ZAJ-RDJA110
G/Y
[1]
NC700XA/SA shown:
[1]
Connection: Red/black – Ground
TOOL:
Test probe
07ZAJ-RDJA110
R/Bl
[1]