![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757128.webp)
4-9
3. L./R. ENGINE UNDER COVERS
a. REMOVAL
Remove the following parts.
– Engine cover (P. 4-2)
– Front separate cover (P. 4-7)
– Electric part cover (P. 3-22)
1) Remove the flush plug cap from the R. engine under cover.
2) Open the wire harness clip. Remove the power tilt switch
3P connector from the connector bracket B.
3) Disconnect the power tilt switch 3P connector.
4) Set a screwdriver in the slot in each mud guard clip as
shown and raise the mud guard clips.
Remove the six mud guard clips.
5) Remove the under cover grommet.
[1]
FLUSH PLUG
CAP
[5]
UNDER COVER
GROMMET
[4]
MUD GUARD
CLIP (6)
[3]
MUD GUARD
CLIP
[1]
SCREWDRIVER
[2]
SLOT
[2] POWER TILT SWITCH
3P CONNECTOR
[1]
CONNECTOR
BRACKET B
[3]
WIRE HARNESS
CLIP