Quick Start Guide
Table of contents
Introduction
This page offers information on how to get a quick start with your MACCHIATObin Single
Shot or the MACCHIATObin Double Shot board, how to boot it for the first time and make
sure everything is working fine. For instructions on how to compile system components and
boot them with your own build binaries, see BSP HowTo.
I/O ports and connectors
First, let us see what ports and connectors are available on the MACCHIATObin
boards. Below is a picture of the MACCHIATObin Double Shot board from top view:
Note
The 10G copper connectors are only available on the Double Shot version of
MACCHIATObin; they are not mounted on the Single Shot MACCHIATObin board.
1/7
