background image

8

Refuel With Care

Gasoline is extremely flammable and gasoline vapor can explode. 

Refuel only outdoors, in a well-ventilated area, with the engine OFF. 

Never smoke near gasoline, and keep other flames and sparks away. 

Always store gasoline in an approved container.

Wear Protective Clothing

Wearing protective clothing will reduce your risk of injury. Long pants 

and eye protection reduce the risk of injuries from thrown objects. 

Sturdy shoes with aggressive soles will help protect your feet and give 

you better traction on slopes or uneven ground.

Stop the Engine When Not Mowing

If you need to leave the mower for any reason, even just to inspect the 

lawn ahead, stop the engine by releasing the blade control lever.

Avoid Slopes

Avoid steep slopes of more than 
20

°.

Mow across slopes, not up and 

down. Be careful when changing 

direction. Mowing on a slope 

when the grass is damp or wet 

could cause you to slip, fall, and 

lose control of the mower.

NOTICE

Mowing on steep slopes can 

starve the engine of oil, causing engine damage that is not covered by 

the 

DISTRIBUTORS LIMITED WARRANTY (

page 22

).

Keep all four wheels on the ground, and be careful to avoid losing 
your footing and your control of the mower. Keep a firm grip on the 
handlebar, and walk, never run, with the mower. Be very careful when 
mowing uneven or rough ground.

If stuck, do not kick or shove the mower with your foot. Use the 

handlebar to control the mower.

Avoid Obstacles

Gravel, loose stones, and landscaping material can be picked up by 

the mower and thrown many feet with enough force to cause serious 

personal injury and/or property damage. The best way to prevent 

potential injury from thrown objects is to release the blade control 

lever to stop the blades before reaching areas with gravel, loose 

stones, or landscaping material.
Be careful when mowing over obstacles that stick up above the 
surface of the lawn such as sprinkler heads, paving, edging, raised 
tree roots, etc.

If the blade hits something, or if the mower starts to vibrate, stop the 

engine immediately, disconnect the spark plug cap, and check for 

damage (

page 12

). Striking objects may damage the blades, bend the 

crankshaft, and/or break the mower deck or other components. 

Vibration usually indicates serious trouble. 

The 

DISTRIBUTOR’S LIMITED WARRANTY

 (

page 22

) does not 

cover parts damaged by accidental impact collision.

Operating the Controls

Blade Control Lever

The blade control lever must 

be pulled back against the 

handlebar to start and run the 

engine. The blades start to 

rotate when the lever is pulled 

back against the handlebar 

and the recoil starter grip is 
pulled.

Continue to hold the lever fully against the handlebar. This will keep 

the engine and blades rotating smoothly and prevent premature wear 

to the flywheel brake system. 
Release the blade control lever to stop the engine and stop blade 

rotation whenever you need to leave the mower. 

Select Drive Control

With the engine running and 

the blades rotating, slowly 

push the Select Drive control 

to propel the mower forward.
Normal operation is with your 

hand comfortably around the 

handle bar and Select Drive 

control. 
Push the Select Drive control 

with your thumb into the 

indentation for extra torque 

(up a hill, or through thick 

grass).
You can reduce the ground speed by partially releasing the Select 

Drive control. 
Ground speed varies with terrain, grass height, slope, and grass bag 

weight. Moving the Select Drive knob (shown below) or varying how 

far you push the Select Drive control forward allows you to maintain 

the desired ground speed under constantly changing mowing 

conditions.
Release the Select Drive control to disengage (stop) the rear wheels.
Disengage the drive when mowing around trees and other obstacles. 

Push the mower around obstacles for better directional control.

Adjusting the Select Drive Control

The Select Drive control 

knob allows you to adjust the 

maximum ground speed 

when the Select Drive lever 
is fully engaged.

Adjustment is from MIN to 

MAX. With the Select Drive 

lever fully engaged:

MIN

 will propel the lawn 

mower at its slowest speed.

MAX

 will propel the lawn 

mower at its fastest speed.
The position of Select Drive 

knob determines the forward 

speed of the lawn mower, but it still varies based on the mowing 

surface and terrain. For example, with the knob in the slowest 

position, the mower may seem to propel quickly on smooth concrete. 

However, once the lawn mower is moving through grass, it will go 

slower because of the added resistance of the grass.

 WARNING

A worn, cracked, or damaged blade can break, and 
pieces of the damaged blade can become dangerous 
projectiles.

Blades thrown from the mower could seriously hurt or 

kill someone.

Inspect the blades regularly (see 

page 12

), and do not 

operate the mower with a worn or damaged blade.

BLADE 
CONTROL 
LEVER

SELECT DRIVE CONTROL

SELECT DRIVE KNOB

Содержание HRX217VLAA





























Отзывы: