Honda HRX217TDA Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 81

background image

TECHNICAL & CONSUMER INFORMATION

62

Oxygenated Fuels

Some conventional gasolines are being blended with alcohol or an
ether compound. These gasolines are collectively referred to as
oxygenated fuels. To meet clean air standards, some areas of the
United States and Canada use oxygenated fuels to help reduce
emissions.

If you use an oxygenated fuel, be sure it is unleaded and meets the
minimum octane rating requirement.

Before using an oxygenated fuel, try to confirm the fuel's contents.
Some states/provinces require this information to be posted on the
pump.

The following are the EPA-approved percentages of oxygenates:

ETHANOL

——

(ethyl or grain alcohol) 10% by volume

You may use gasoline containing up to 10% ethanol
by volume. Gasoline containing ethanol may be
marketed under the name “Gasohol”.

MTBE

———— (Methyl Tertiary Butyl Ether) 15% by volume

You may use gasoline containing up to 15% MTBE by
volume.

METHANOL

—

(methyl or wood alcohol) 5% by volume

You may use gasoline containing up to 5% methanol
by volume, as long as it also contains cosolvents and
corrosion inhibitors to protect the fuel system.
Gasoline containing more than 5% methanol by
volume may cause starting and/or performance
problems. It may also damage metal, rubber, and
plastic parts of your fuel system.

Fuel system damage or performance problems resulting from the use
of an oxygenated fuel containing more than the percentages of
oxygenates mentioned above are not covered under warranty.

«
...
62
63
64
65
66
...
»

Содержание HRX217TDA


















































































Отзывы:

Нет отзывов

Похожие инструкции для HRX217TDA

Бренд: Lawn-Boy Страницы: 20

Бренд: Lawn-Boy Страницы: 16

Бренд: Ransomes Страницы: 64

Бренд: Lastec Страницы: 56

Бренд: Atom Страницы: 6

Бренд: Smithco Страницы: 114

Ultra Vac QDS Frontrunner FRCK524

Бренд: Exmark Страницы: 7

Бренд: Worx Страницы: 24

Бренд: Yazoo/Kees Страницы: 84

Бренд: Yard-Man Страницы: 20

Бренд: Landxcape Страницы: 300

Бренд: Yard-Man Страницы: 20

Бренд: Makita Страницы: 116

Бренд: Walker Страницы: 88

Бренд: Ferrari Страницы: 56

Бренд: Yardworks Страницы: 40

Бренд: Yard-Man Страницы: 8

Бренд: Yard-Man Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды