background image

9

Shift Lever

Use the shift lever to select 
the forward speed at which 
you wish to mow.

Do not use the throttle lever 
to adjust your forward speed. 
The throttle lever must 
remain in the FAST position 
for good mowing 
performance.

The position of the shift lever 
determines the maximum 
ground speed when the drive 
clutch lever is fully engaged.

For maximum mowing performance, use the lower speed range for
mowing and the higher speed range for transporting.

With the shift lever all the way back and the drive clutch lever
engaged, the mower will move slowly or not at all.

Starting the Engine

Before starting the engine, always release the drive control lever so
that the mower will not move forward when you operate the starter.

1. Turn the fuel valve to the ON position (

page 3

).

2. Move the throttle lever to the 

FAST position.

3. Start the engine using the

electric starter or the recoil
(manual) starter.

Electric start

Turn the starter key switch to
the START position. Let the
key return to the RUN
position when the engine
starts.

The starter should not be
cranked for more than 5
seconds at a time. If the
engine fails to start, release
the switch and wait 10 seconds before operating the starter again.

If the battery does not have sufficient charge to start the engine,
possibly due to a long storage period, use the recoil starter to start
the engine for at least one mowing session. The battery should
have sufficient charge after one mowing session (approximately
1 hr).

Manual start:

Turn the engine switch to the RUN position. The engine switch
must be in the RUN position to start the engine with the recoil
starter.

Pull the starter grip lightly until you feel resistance, and then pull
briskly. Return the starter grip gently

To ensure easy restarting and maximum performance from the Auto 
Choke System, allow the engine to run for at least three minutes after 
starting a cold engine before shutting down. This minimum run time 
will be longer if the temperature is below 21°C.

Stopping the Engine

1. Release the drive clutch and blade

control levers.

2. Move the throttle lever to the

STOP position.

3. Turn the key switch to the OFF

position

4. If your mower will not be used for 

3 to 4 weeks, we recommend 
running the engine’s carburetor 
out of fuel. You can do this by 
leaving the fuel valve OFF, 
restarting the engine and running it until it stops. See “AVOIDING 
FUEL-RELATED PROBLEMS” on 

page 18

 if you don’t plan to use 

your mower for a month or more.

5. Clean your mower after each mowing; refer to “Cleaning” on

page 14

.

SERVICING YOUR MOWER

Proper maintenance is essential for safe, economical, and
trouble-free operation. It also helps reduce air pollution.

To help you properly care for your mower, the following pages include 
a maintenance schedule, routine inspection procedures, and simple 
maintenance procedures using basic hand tools. Other service tasks 
that are more difficult or require special tools are best handled by 
professionals and are normally performed by a Honda technician or 
other qualified mechanic.

The maintenance schedule applies to normal operating conditions. If
you operate your mower under severe conditions, such as sustained
high load, high temperature, or unusually wet or dusty conditions,
consult your servicing dealer for recommendations applicable to your
individual needs and use.

Remember that an authorised Honda servicing dealer knows your
mower best and is fully equipped to maintain and repair it. To ensure
the best quality and reliability, use only new, Honda Genuine parts or
their equivalents for repair and replacement.

Maintenance Safety

Some of the most important safety precautions follow. However, we
cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.

THROTTLE

SHIFT 
LEVER 

SLOW

FAST

ST

OP

FAST

THROTTLE 
LEVER

START

RUN

 WARNING

Improper maintenance, or failure to correct a problem 
before operation, can cause a malfunction in which you 
can be seriously hurt or killed.

Always follow the inspection and maintenance 
recommendations and schedules in this owner’s manual.

 WARNING

Failure to properly follow maintenance instructions and 
precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in this 
manual.

OFF

Содержание HRX217HZUA

























Отзывы: