8
Smart Drive Control
With the engine running
and the blades rotating,
slowly push the
Smart Drive control to
propel the mower forward.
Ground speed will increase
as you rotate the Smart
Drive control. After
maximum ground speed is
obtained, applying
additional pressure will not
further increase ground
speed. Apply only enough pressure to achieve the desired speed.
Ground speed control sensitivity will vary with such factors as terrain,
grass height, slope, and grass bag weight. For example, achieving a
very slow ground speed on smooth level terrain requires a very light
pressure to be applied to the Smart Drive control. However, additional
pressure may be required to achieve the same ground speed on
slopes, tall grass, or uneven terrain. The Smart Drive control is
designed to allow you to move the control to maintain the desired
ground speed under constantly changing mowing conditions.
Release the Smart Drive control to disengage the rear wheels.
The Smart Drive control can be adjusted up or down into any one of
five positions for operator comfort (
).
STOPPING THE ENGINE
1. Release the blade control
lever to stop the blade
rotation.
2. Move the throttle lever to
the STOP position to stop
the engine.
3. When the mower is not in
use, turn the fuel valve to the OFF
position.
4. If your equipment will not be used for
3 to 4 weeks, we recommend
running the engine’s carburetor out
of fuel. You can do this by leaving the
fuel valve OFF, restarting the engine
and running it out of fuel. See ”Fuel”
on
for periods of inactivity
that exceed 4 weeks.
SAFE MOWING PRACTICES
For your safety, keep all four wheels on the ground, and be careful to
avoid losing your footing and your control of the mower. Keep a firm
grip on the handlebar, and walk, never run, with the mower. Be very
careful when mowing uneven or rough ground.
If stuck, do not kick or shove the mower with your foot. Use the
handlebar to control the mower.
Slopes
Mow across slopes, not up and
down. Avoid steep slopes (more
than 20
), and be careful when
changing direction. Mowing on a
slope when the grass is damp or wet
could cause you to slip, fall, and lose
control of the mower.
Obstacles
Use the side of the mower to cut
close to large obstacles, such as fences or walls.
Release the Smart Drive control to disengage the drive when mowing
around trees and other obstacles. Push the mower around obstacles
for better directional control. Be careful when mowing over obstacles
embedded in the lawn, such as sprinkler heads, paving, edging,
raised tree roots, etc. Avoid anything that sticks up above the surface
of the lawn.
If the blade hits something or if the mower starts to vibrate, stop the
engine immediately, disconnect the spark plug cap, and check for
damage (
). Striking objects may damage the blades, bend the
crankshaft, and/or break the mower deck or other components.
Vibration usually indicates serious trouble.
The
DISTRIBUTOR’S LIMITED WARRANTY
) does not
cover parts damaged by collision.
Gravel and Loose Objects
Gravel, loose stones, and landscaping material can be picked up by
the mower and thrown many feet with enough force to cause serious
personal injury and/or property damage. The best way to prevent
potential injury from thrown objects is to release the blade control
lever to stop the blades before reaching areas with gravel, loose
stones, or landscaping material.
SMART
DRIVE
BLADE
CONTROL
PUSH
ROTO
STOP
CONTROL
ADJUST
POSITION
BLADE
CONTROL
2
SMART DRIVE CONTROL
BLADE CONTROL LEVER
STOP
THROTTLE
LEVER
OFF
WARNING
The blades are sharp and spin at high speed.
A spinning blade can cut you severely and can amputate
fingers and toes.
• Wear protective footwear.
• Keep your hands and feet away from the mower deck while
the engine is running.
• Stop the engine before performing any adjustment,
inspection, or maintenance.
WARNING
A worn, cracked, or damaged blade can break, and pieces
of the damaged blade can become dangerous projectiles.
Thrown objects can cause serious injury.
Inspect the blades regularly, and do not operate the mower
with a worn or damaged blade.
Содержание HRR216VYA
Страница 22: ...NOTES ...
