Honda HRR216VYA, Руководство пользователя

Страница: 5 / 24

5
GET THE MOWER READY
Handlebar Height Adjustment
1. Adjust the handlebar height for a comfortable operating position.
2. Turn the handlebar adjust knobs 90 degrees into the unlock
position.
3. Move the handlebar up or down so that the locating pins align with
either the upper or lower holes on the handlebar mounting
brackets.
4. Turn the adjust knobs 90 degrees into the lock position and the
pins will snap into the holes and lock into position.
Smart Drive™ Control Adjustment
The Smart Drive control can be
adjusted up or down into any
one of five positions for
operator comfort.
1. Slide the multi-position
adjuster to the left to unlock
the control.
2. Move the Smart Drive
control up or down into the
position most comfortable.
3. Release the multi-position
adjuster and allow it to
engage.
Do not attempt to adjust the
position of the Smart Drive
control while the mower is in
motion.
Rear Discharging
To discharge clippings to the rear, make sure the engine is not
running, and then remove the grass bag or mulching plug. Lower the
rear discharge guard to allow grass clippings to exit as shown below.
Mulching Plug
The mulching plug helps to
curve the inside of the
mower deck for more
efficient mulching.
Install and remove the
mulching plug by raising
the discharge guard as
shown. The mulching plug
only fits one way. Remove
the mulching plug when
using a grass bag.
Grass Bag
A lawn mower works like a vacuum cleaner; it blows air through the
bag, which traps the grass clippings. Always empty the grass bag
before it becomes filled to the limit of its capacity. Bagging
performance will diminish after the bag becomes about 90% filled.
Also, the bag is easier to empty when it is not packed full.
Inspection
During normal use, the grass bag material is subject to deterioration
and wear.
NOTICE
Frequently inspect the grass bag for tears, holes, and excessive wear.
Check for necessary replacement. Make sure the new bag meets the
original specifications.
Grass bag replacement is explained on page 11 .
HANDLEBAR
LOW
HIGH
HANDLEBAR
ADJUST
KNOB (2)
LOCK
UNLOCK
HANDLEBAR MOUNTING
BRACKET HOLES (2 EACH SIDE)
CONTROL
™
SMART DRIVE
CONTROL
MULTI-POSITION
ADJUSTER

CAUTION
Do not raise the rear discharge guard while the engine is
running.
Raising the rear discharge guard with the engine running will
allow clippings and other objects to be thrown from the
opening.
Thrown objects could injure you.
REAR
DISCHARGE
GUARD
DISCHARGE
GUARD
MULCHING
PLUG