© Honda Access Europe NV. 2008
3
CAUTION
INSTALLATION
Before You Begin:
•
In these instructions, the illustrations show the left
side sunshade being installed. The same
procedure applies to the right side sunshade.
•
This kit should only be installed if the ambient air
temperature is 15°C (60°F) or above. Heat the
bonding surfaces with a hair dryer set on LOW
when the ambient air temperature is below 15°C
(60°F).
•
Before attaching the sunshades, thoroughly clean
the bonding surfaces with a cleaner.
•
Be extremely careful not to damage the body paint
finish.
•
Do not move the rear door window glass
during driving.
•
The sunshade can come off unless it is
installed on the clip securely.
•
Sunshade must not be used during the
hours of darkness.
•
To allow the adhesive to “cure”, do not
install the sunshade for 24 hours; if not the
clips will not reach their maximum adhesive
strength and could be lost.
TOOLS AND SUPPLIES REQUIRED
•
Scale
•
Felt-tip pen
8313010R
www.auto-sonnenschutz.ch
