Honda GOLDWING GL1800/A 2015 Скачать руководство пользователя

Страница: 134 / 289

Audio Systems

131

iPod

/USB Flash Drive

• Do not leave iPods

/USB flash drives in the vehicle (trunk). High heat will

damage it.

• Read precaution statements on the provided instructions of your iPods

/USB

flash drives.

• Use iPod

with the latest version of firmware.

• Some USB flash drives (such as devices with security lockout features, etc.)

may not be used or restricted to its function.

• Do not use hard disks, card readers, and memory readers which may damage

the device and data. If you accidentally connect the one of them, turn the

ignition switch OFF and remove it.

• We recommend backing up your data before playing it.

• iPods

or some of USB flash drives can be charged with the USB cable when

the ignition switch is in the ON or ACC position. The charging time may be

longer than usual.

• We recommend covering your iPods

/USB flash drives with Honda

accessory audio pouch, or soft fabric or cover to protect from damage.

• Be careful to not get the USB connector wet.

• Do not connect with a hub.

• Do not connect incompatible iPods

/USB flash drives.

• Music information may not be displayed. If the character code in use is not

supported, ‘‘ . ’’ will be displayed.

• If the audio system does not recognize the iPod

, try reconnecting it a few

times or reboot the device.

Содержание GOLDWING GL1800/A 2015


































































































































































































































































































Результаты поиска

Содержание GOLDWING GL1800/A 2015

Отзывы:

Похожие инструкции для GOLDWING GL1800/A 2015

Бренды по названию

Популярные бренды

Honda GOLDWING GL1800/A 2015, Руководство пользователя

Результаты поиска

Содержание GOLDWING GL1800/A 2015

Отзывы:

Похожие инструкции для GOLDWING GL1800/A 2015

Бренды по названию

Популярные бренды