127
To adjust the brake lining clearance:
Squeeze the brake lever firmly two or three times then release it.
Raise the front and rear wheels off the ground by placing a
support block under the vehicle.
Beginning with either the left or right front wheel, remove the
inspection hole plug (Fig.
) and line up the hole with one of the
brake adjusters (Fig.
).
Back the adjuster off three clicks, then squeeze the brake lever
several times. Spin the wheel manually to make sure the brake
does not drag.
Line up the inspection hole with the second adjuster and repeat
steps 3 through 5.
Reinstall the inspection hole plug, seating it into the inspection
hole as shown in Fig.
.
Follow steps 3 through 7 to adjust the other front brake.
Recheck the brake lever free play. If free play is still excessive after
adjusting the brake lining clearance, there is probably air in the
brake system and it must be bled out. See your authorized Honda
dealer for this service.
Using a screwdriver, turn the brake shoe adjuster ( ) in the
direction of the arrow until the front brake locks.
(1)
1.
2.
3.
4.
1
5.
6.
7.
8.
9.
(1) Brake adjusters
4-26
4-25
Fig. 4-26
4-25
01/04/28 16:42:14 3CHN5620_132
Содержание FOURTRAX 350 4x4 2001
