202
Main
tenan
ce
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
1.
Remove the coupler.
2.
Remove the rubber weather seal.
3.
Remove the hold-down wire, then remove
the bulb.
4.
Insert a new bulb.
High/Low beam headlight: 60/55 W (HB2)
■
High/Low Beam Headlight
1
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the cargo area, have the aiming
readjusted at an authorized Honda Fit EV dealer or by
a qualified technician.
The HB2 type is halogen bulb.
When replacing a bulb, handle it by its base, and
protect the glass from contact with your skin or hard
objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
The exterior lights’ inside lenses (headlights, brake
lamps, etc.) may fog temporarily after a vehicle wash
or while driving in the rain. This does not impact the
exterior light function.
However, if you see a large amount of water or ice
accumulated inside the lenses, have your vehicle
inspected by an authorized Honda Fit EV dealer.
Rubber Weather Seal
Coupler
Bulb
Hold-Down Wire
14 FIT EV-31TX96100.book 202 ページ 2013年6月6日 木曜日 午後2時33分
Содержание Fit EV
Страница 97: ...96 14 FIT EV 31TX96100 book 96 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 141: ...140 14 FIT EV 31TX96100 book 140 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 187: ...186 14 FIT EV 31TX96100 book 186 ページ 2013年6月6日 木曜日 午後2時33分 ...
Страница 269: ...14 FIT EV 31TX96100 book 268 ページ 2013年6月6日 木曜日 午後2時33分 ...