Step 4:Connect the front steering linkage
Tools needed: Wrenches & Screwdriver
& Socket
A. Remove bolt and nut from the
steering arm with the wrench and
socket that is provided.
B.
Locate the 2 components identified in
gray, the steering rod and the steering
bracket. Align the slotted hole in
steering bracket with the steering rod,
insert the steering rod into the slotted hole.
C. Align steering bracket with the hole
in steering arm. Insert the bolt
through the holes and tighten with
the wrench and socket provided.
Repeat Steps A&C&D on right side.
D. Pull the rubber boot over the
connection of steering bracket and
steering arm.
D
Slotted hole
Steering rod