18
CONTROLS & FEATURES
Overload Indicator
If the generator is overloaded (in excess of 2.0 kVA), or if there is a
short circuit in a connected appliance, the overload indicator (red) will
come ON. The overload indicator (red) will stay ON, and after about
four seconds, current to the connected appliance(s) will shut off, and
the output indicator (green) will go OFF. However, the engine will
continue to run.
Oil Alert
®
Indicator
The Oil Alert® system is designed to prevent engine damage caused by
an insufficient amount of oil in the crankcase. Before the oil level in the
crankcase can fall below a safe limit, the Oil Alert indicator (red) comes
ON and the Oil Alert system automatically will stop the engine (the
engine switch will remain in the ON position).
If the engine stops or the oil alert indicator (red) comes ON when you
pull the starter grip, check the engine oil level (see page 39) before
troubleshooting in other areas.
OVERLOAD INDICATOR (RED)
OIL ALERT INDICATOR
(RED)
31Z398000.book 18 ページ 2013年8月1日 木曜日 午後4時36分
Содержание EB2000i
Страница 11: ...9 GENERATOR SAFETY 31Z398000 book 9...
Страница 89: ...87 MEMO 31Z398000 book 87...
Страница 90: ...88 MEMO 31Z398000 book 88...