Honda Dream DX CD110 Скачать руководство пользователя страница 33

Страница: 33 / 81

Honda Motorcycle & Scooter India Pvt. Ltd.

CD110 Dream DX

Do not operate the kick-starter while the

engine is running as engine damage could

result. Do not apply excessive force on the

kick-starter.

Fold up the kick-starter after the

kick-starter is returned to the pedal stop.

Preparation

Before starting, insert the key, turn the

ignition switch ON and confirm the following:

• The transmission is in neutral (neutral

indicator light ON).

• The fuel knob is ON.

Starting Procedure

To restart a warm engine follow the

procedure for High Air Temperature.
Normal Air Temperature (10

C to 35

C):

1. Pull the choke lever (1) up all the way

to Fully ON (A).

<Using the electric starter>

With the throttle slightly open, press the

starter button.

b <Using the kickstarter pedal>

Lightly depress the kickstarter until

resistance is felt.

Then let the kickstarter return to the

top of its stroke.

With the throttle slightly open, operate

the kickstarter.

Kick from the top of the stroke through

to the bottom with a rapid, continuous

motion.

3. Immediately after the engine start, push

the choke lever down to the halfway

position (B).

4. Warm up the engine by opening and

closing the throttle slightly.

5. About 15 seconds after the engine start,

push the choke lever down all the way

to fully OFF (C).

6. If idling is unstable, open the throttle

slightly.

(1)

(A)

(B)

(C)

(1) Choke Lever

(A) Fully ON (B) Halfway Position (C) Fully OFF

Содержание Dream DX CD110


















































































Результаты поиска

Содержание Dream DX CD110

Отзывы:

Похожие инструкции для Dream DX CD110

Бренды по названию

Популярные бренды

Honda Dream DX CD110, Руководство пользователя

Результаты поиска

Содержание Dream DX CD110

Отзывы:

Похожие инструкции для Dream DX CD110

Бренды по названию

Популярные бренды