Honda CRF450R 2020, Руководство пользователя и соревновательное пособие

Страница: 41 / 199

36
Servicing Your Honda
Fuel Tank (CRF450RX)
9. Check for interference between the frame and
tank, and adjust the cushion rubbers (16) on the
both sides of the frame if necessary.
Installation
1. Install the fuel tank (1) on the frame.
2. Install and tighten the collar (2) and fuel tank
bolt (3) to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
3. Hook the fuel tank band (4).
4. Put the breather tube (5) in the steering stem
nut (6).
5. Remove the hose clamp (7) from the breather
tube.
6. Slide the shroud (8) toward the down so that
the shroud tab (9) and the slot (10) on the air
cleaner housing cover (11) is aligned.
7. Install the shroud D bolt (12), shroud C bolt
(13), shroud B bolt (14) and shroud A bolt (15).
Tighten the shroud A and B bolts to the
specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
Tighten the shroud C and D bolts to the
specified torque:
3.8 lbf·ft (5.2 N·m, 0.5 kgf·m)
The right and left shrouds can be installed in
the same manner.
8. Install the seat (page 34).
(16) cushion rubbers
(16)
3.35 ± 0.10 in
(85.0 ± 2.5 mm)
(1) fuel tank (3) fuel tank bolt
(2) collar (4) fuel tank band
(5) breather tube (7) hose clamp
(6) steering stem nut
(2)
(4)
(3)
(1)
(5)
(7)
(6)
(8) shroud (12) shroud D bolt
(9) tab (13) shroud C bolt
(10) slot (14) shroud B bolt
(11) air cleaner housing cover (15) shroud A bolt
(8)
(13)
(14)
(15)
(10)
(12)
(9)
(11)