Honda CRF125F 2020 Скачать руководство пользователя страница 168 | Manualshive

Страница: 168 / 192

Honda CRF125F 2020 Скачать руководство пользователя страница 168

158

Technical Information

Oxygenated Fuels

Some conventional gasolines are being blended
with alcohol or an ether compound. These
gasolines are collectively referred to as
oxygenated fuels. To meet clean air standards,
some areas of the United States and Canada use
oxygenated fuels to help reduce emissions.

If you use an oxygenated fuel, be sure it is
unleaded and meets the minimum octane rating
requirement.

Before using an oxygenated fuel, try to confirm
the fuel’s contents. Some states/provinces
require this information to be posted on the
pump.

The following are the EPA-approved
percentages of oxygenates:

ETHANOL (ethyl or grain alcohol) up to 10%
by volume.
You may use gasoline containing up to 10%
ethanol by volume. Gasoline containing
ethanol may be marketed under the name
‘‘Gasohol’’.

METHANOL (methyl or wood alcohol) up to
5% by volume.
You may use gasoline containing up to 5%
methanol by volume as long as it contains
cosolvents and corrosion inhibitors to protect
the fuel system. Gasoline containing more than
5% methanol by volume may cause starting
and/or performance problems. It may also
damage metal, rubber, and plastic parts of your
fuel system.

20YM CRF125FFB_31K28B60_FM.book 158 ページ２０１９年３月１日　金曜日　午後１時４８分

«
...
166
167
168
169
170
...
»

Содержание CRF125F 2020

































































































































































































Отзывы:

Нет отзывов