manualshive.com logo in svg

Honda CRF 300L 2021, Руководство пользователя

Поделиться
Скачать
Honda CRF 300L 2021 Скачать руководство пользователя страница 100

Overheating (High coolant temperature indicator is on)

The engine is overheating when the following

occurs:

●

High coolant temperature indicator

comes on.

●

Acceleration becomes sluggish.

If this occurs, pull safely to the side of the

road and perform the following

procedure.

Extended fast idling may cause the high

coolant temperature indicator to come on.

NOTICE

Continuing to ride with an overheated engine

can cause serious damage to the engine.

1.

Stop the engine using the ignition switch,

and then turn the ignition switch to the

ON position.

2.

Check that the radiator fan is operating,

and then turn the ignition switch to the

OFF position.

If the fan is not operating:

Suspect a fault. Do not start the engine.

Transport your vehicle to your dealer.

If the fan is operating:

Allow the engine to cool with the ignition

switch in the OFF position.

3.

After the engine has cooled, inspect the

radiator hose and check if there is a leak.

2

P. 81

If there is a leak:

Do not start the engine. Transport your

vehicle to your dealer.

4.

Check the coolant level in the reserve

tank. 

2

P. 81

u

Add coolant as necessary.

5.

If 1-4 check normal, you may continue

riding, but closely monitor the high

coolant temperature indicator.

Troubleshooting

96

Содержание CRF 300L 2021














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды