uu
Maintenance Under the Hood
u
Engine Coolant
458
Main
tenan
ce
1. Make sure the engine and radiator are
cool.
2.
Turn the radiator cap counterclockwise to
relieve any pressure in the cooling system.
Do not push the cap down when turning.
3.
Push down and turn the radiator cap
counterclockwise to remove it.
4.
The coolant level should be up to the base
of the filler neck. Add coolant if it is low.
5.
Put the radiator cap back on, and tighten it
fully.
6.
Pour coolant into the reserve tank until it
reaches the
MAX
mark. Put the cap back
on the reserve tank.
■
Radiator
1
Radiator
NOTICE
Pour the fluid slowly and carefully so you do not spill
any. Clean up any spills immediately; they can
damage components in the engine compartment.
3
WARNING
Removing the radiator cap while the
engine is hot can cause the coolant to spray
out, seriously scalding you.
Always let the engine and radiator cool
down before removing the radiator cap.
Radiator Cap
16 CR-V-31T0A6400.book 458 ページ 2016年4月6日 水曜日 午前10時55分