96 |
| 97
DRIVING
DRIVING
Acoustic Vehicle Alerting System*
Alerts pedestrians the vehicle is approaching when travelling at a speed of
about 12 mph (20 km/h) or less.
Shifting
Select the vehicle’s gear using a simple button interface. Apply the brake pedal
and select a gear.
Park (P):
Press to put the vehicle in Park.
A red indicator appears.
Reverse (R):
Pull back to put the vehicle
in reverse. A green indicator appears.
Neutral (N):
Press to put the vehicle in
Neutral. A red indicator appears.
Drive (D):
Press to put the vehicle
in Drive. A green indicator appears.
release the electric parking brake to
begin driving (see page 99).
You may occasionally find that it takes longer than usual for the vehicle to
start moving when you select reverse (r). release and/or depress the brake
pedal. This may occur when the High voltage battery level is extremely low and
does not indicate a vehicle malfuction. Always apply the brake pedal before
shifting into Park (P) and confirm that the Park (P) is shown on the gear position
indicator before releasing the brake.
n
Changing the Power Mode
Use the PoWer button to cycle through power modes or start the power
system.
Accessory or On mode:
Press the
PoWer button once without pressing
the brake pedal for Accessory mode.
Press it again for on mode.
Starting the power system:
Press and
hold the brake pedal, then press the
PoWer button. Keep your foot firmly
on the brake pedal until the ready to
Drive indicator comes on.
Turning the power mode off:
Put the
transmission into Park (P), then press
the PoWer button. If you press the
button and the shift button is not in
P, the gear position automatically
changes to P.
*Canadian models
The vehicle can roll away if left unattended without confirming that Park (P) is
engaged. Always keep your foot on the brake pedal until you have confirmed
that P is shown on the gear position indicator.
WARNING
When you change from D to r and vice versa or want to change to Park (P),
come to a complete stop and keep the brake pedal applied. operating the gear
buttons before the vehicle has come to a complete standstill can damage the
transmission.
NOTICE
Note:
The gear position automatically changes to Park (P), if you open the driver’s
door under the following conditions:
• The vehicle is stationary with the power mode in oN or moving at 1 mph (2
km/h) or slower.
• You have unfastened the driver side seat belt.
- If you manually change the gear position from Park (P) with the brake
pedal depressed, the gear position will automatically return to Park (P) once
you release the brake pedal.
• The transmission is in a gear other than Park (P).
Car wash mode
If you are driving through a conveyor-style car wash where you or the attendant
do not remain in the vehicle, follow these steps while the power system is on:
1. Press and hold the brake pedal. Make sure the reADY indicator is on.
2. Press Neutral (N). Within 6 seconds, press and hold Neutral (N) again for
two seconds.
The transmission remains in Neutral (N) for 15 minutes with the power mode in
ACCeSSorY. After 15 minutes, the gear position changes to Park and the power
system turns off.
The transmission may not stay in Neutral (N) position while the following
indicators are on:
• PoWer SYSTeM indicator
• Transmission system indicator
• 12-volt battery charging system indicator
Содержание Clarity Plug In Hybrid 2018
Страница 1: ...2018 PLUG IN HYBRID OWNER S GUIDE...