104 |
| 105
DRIVING
DRIVING
Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)
Helps maintain a constant vehicle speed and a set following interval behind a
vehicle detected ahead of you.
n
Activating and Setting the Vehicle Speed
1. Press the MAIN button. The ACC
indicator appears.
2. Accelerate to the desired speed.
Above 25 mph (40 km/h):
Take your
foot off the pedal and press the -/
SeT button to set the speed
Below 25 mph (40 km/h) (Low
Speed Follow):
Press the -/SeT button to set
the speed at 25 mph (40 km/h)
regardless of current speed.
n
Adjusting the Vehicle Speed
Press the reS/+ button to increase
speed, or the -/SeT button to
decrease speed.
each time you press the switch up or
down, the vehicle speed is increased
or decreased by about 1 mph or 1
km/h.
reS/+ button
CANCeL button
INTervAL button
-/SeT button
MAIN button
To increase speed
To decrease speed
n
Adjusting the Following Interval
Press the Interval button to change
the following-interval. each time
you press the button, the following-
interval setting cycles through short,
middle, long, and extra long.
Interval
Short
Middle
Long
Extra Long
Approx. Gap
(seconds)
1.1
1.5
2.1
2.8
n
Switching to Standard Cruise Control
• Press and hold the Interval button.
• Cruise Mode Selected appears in the Driver Information Interface.
Press and hold the Interval button again to switch back to ACC. ACC
Mode Selected appears.
n
When in Operation
If a vehicle is detected ahead of
you when ACC is turned on, the
system maintains, accelerates, or
decelerates your vehicle’s set speed
to keep the vehicle’s set following
interval from the vehicle ahead.
If a vehicle detected ahead of you
slows down abruptly, or if another
vehicle cuts in front of you, a beep
sounds and BrAKe appears on the
Driver Information Interface to alert
you.
Beep
When a vehicle detected ahead is within range and stops, your vehicle also
stops. The Stopped message appears on the Driver Information Interface.
When the vehicle ahead of you starts again, the vehicle icon on the Driver
Information Interface blinks. Press the reS/+ button or the -/SeT button, or
press the accelerator pedal to resume the prior set speed.
Содержание Clarity Plug In Hybrid 2018
Страница 1: ...2018 PLUG IN HYBRID OWNER S GUIDE...