Setting Mode A
If the buttons are not pressed for about 30
seconds, the control is automatically switched
from the setting mode to the ordinary
display.
If the buttons are not pressed for about 30
seconds, items in the process of being set will
be discarded and only items where settings
have been finalised will be applied. Only if
the ignition switch is turned to the (Off)
position, items in the process of being set
and those that are finalised will be applied.
1 Clock setting:
a
Turn the ignition switch to the (On)
position.
b
Select the odometer, tripmeter A or
c
Press and hold
SEL
and
SET
buttons until
the hour digits start flashing.
d
Press
SEL
button until the desired hour is
displayed.
u
Press and hold
SEL
button to advance
the hour fast.
20180116165849_32K0AC000_eng_BOOK Page 31 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
28
Instruments
(Continued)
