Honda Motorcycle & Scooter India Pvt. Ltd.
57
Adjustment:
Drive chain slack should be checked and
adjusted, if necessary, every 1,000 km
(600 miles). When operated at sustained
high speeds or under conditions of frequent
rapid acceleration, the chain may require
more frequent adjustment.
If the drive chain requires adjustment, the
procedure is as follows:
1. Place the vehicle on its center stand
with the transmission in neutral and the
ignition switch off.
2. Loosen the rear axle nut (1)
3. Loosen the drive chain lock nuts (2).
4. Turn both adjusting nuts (3) an equal
number of turns until the correct
drive chain slack is obtained. Turn the
adjusting nuts clockwise to tighten the
chain, or counterclockwise to provide
more slack.
Align the chain adjuster index marks
(4) with the rear edge of adjusting slots
(5) on both sides of the swingarm.
(3)
(3)
(2)
(2)
(2)
(1)
(1)
(3)
(1) Rear axle nut
¼fj;j ,Dly uV½
(2) Drive chain lock nuts
¼Mªkbo psu ykWd uV~l½
(3) Drive chain adjusting nuts
¼Mªkbo psu ,MtfLaVx uV~l½
(4) Index marks
¼baMSDl ekDlZ½
(5) Rear edge of adjusting slot
¼,MtfLaVx LykWV dk fiNyk fdukjk½
(5)
(5)
(5)
(4)
(4)
(4)
In case of STD
In case of CBS
Содержание CB Hornet 2016
Страница 1: ...CB Hornet OWNER S MANUAL Honda Motor Co Ltd 2016...
Страница 90: ...Honda Motorcycle Scooter India Pvt Ltd 82...