Honda AQUATRAX F-12X, Руководство пользователя

Страница: 198 / 292

190
1
Servicing Your Honda
190
Engine Cooling System
3. Start the engine.
Start the engine before turning on the water
to prevent flow through the exhaust pipe back
into the engine where it could cause severe
damage.
4. Immediately after starting the engine, turn
on the water flow.
Running the engine without water flow for
more than 15 seconds can cause severe
engine and exhaust system damage.
5. Check that water flows out of the cooling
water bypass outlet.
If you don’t see water flowing out of the
outlet, turn off the water and the engine.
Contact your Honda PWC dealer.
6. Let the engine idle for about 10 minutes
while continuing the water flow.
If the engine stops during this procedure,
immediately stop the water flow and resume
from step 3.
REAR
NOTICE
NOTICE