383
uu
Maintenance Under the Hood and Hatch
u
Cooling System
Main
tenan
ce
1. Make sure the engine and radiator are
cool.
2.
Turn the reserve tank cap 1/8 of a turn
counterclockwise and relieve any pressure
in the cooling system. Do not push the cap
down when turning.
3.
Push down and turn the reserve tank cap
counterclockwise to remove it.
4.
Pour coolant into the reserve tank until it
reaches the
MAX
mark.
5.
Put the reserve tank cap back on, and
tighten it fully.
■
Adding the Coolant
1
NOTICE
Pour the fluid slowly and carefully so you do not spill
any. Clean up any spills immediately; they can
damage components in the engine compartment.
3
WARNING
Removing the reserve tank cap while the
engine is hot can cause the coolant to spray
out, seriously scalding you.
Always let the engine and radiator cool
down before removing the reserve tank
cap.
Reserve Tank
Cap
17 NSX-31T6N6000.book 383 ページ 2016年4月22日 金曜日 午後3時44分