328
uu
When Driving
u
Launch Control
Driving
Launch Control
Your vehicle controls the engine and transmission response to maximize
acceleration from standstill.
1.
Use the IDS switch to set the IDS mode to
TRACK
.
2
Integrated Dynamics System (IDS)
P. 323
2.
Depress the brake pedal firmly and change
the gear position to
.
3.
Release the parking brake.
1
Do not use this system when driving on wet or
slippery surfaces as you may lose control of the
vehicle.
The system puts a tremendous load on the engine
and transmission. Frequent use of this system may
lead to reduced vehicle life.
The system does not function when:
•
VSA
®
is off.
•
The vehicle is not at standstill.
•
The gear position is not in
.
•
A gear other than 1st gear is selected when the
system is in manual mode.
•
The parking brake is applied.
•
The vehicle is facing uphill or downhill on a steep
slope.
•
The transmission temperature is too cold or too
hot.
•
There is a problem with a vehicle system.
3
WARNING
Using this system on public roads that are
used by other vehicles and pedestrians can
result in a collision involving serious injury
or death.
D/M
D/M
17 NSX-31T6N6000.book 328 ページ 2016年4月22日 金曜日 午後3時44分