138
uu
Operating the Switches Around the Steering Wheel
u
Driving Position Memory System
*
Co
ntrols
Driving Position Memory System
*
You can store two driver’s seat (except for power lumbar) and outside door mirrors
position with the driving position memory system.
When you unlock and open the driver’s door with a remote transmitter, or keyless
access system, the seat and outside door mirrors adjust automatically to one of the
two preset positions.
When you enter the vehicle, the driver information interface briefly shows you which
remote transmitter you used to unlock the vehicle.
•
DRIVER 1
transmitter is linked to memory button 1.
•
DRIVER 2
transmitter is linked to memory button 2.
The driver’s seat moves rearward depending
on the set seating position once you
•
Stop the vehicle.
•
Put the transmission in
(
P
.
•
Set the power mode to VEHICLE OFF
(LOCK).
•
Then open the driver’s door.
Once the power mode is in the ACCESSORY
position, the driver’s seat moves to the
DRIVER 1
or
2
preset position.
1
Driving Position Memory System
Using the audio/information screen, you can disable
the automatic seat and door mirrors adjustment
function.
2
P. 232
The driver’s seat easy exit feature:
•
Will tilt slightly forward and then move rearward to
allow you to more easily exit the vehicle.
•
Can be turned ON/OFF.
2
P. 232
System Operation
The system will not operate if:
•
The vehicle speed is above 3 mph (5 km/h).
•
Either memory position button is pressed while the
seat is in motion.
•
The seat position is adjusted while in operation.
•
The memory 1 or 2 position is set fully to the rear.
DRIVER 1
DRIVER 2
* Not available on all models
17 NSX-31T6N6000.book 138 ページ ２０１６年４月２２日 金曜日 午後３時４４分
