Honda Accord 2019, Руководство пользователя

Страница: 78 / 88

3. Inspect the cooling system for leaks.
For vehicles used in temperatures below -31°F (-35°C) , change the coolant
from the standard 50:50 antifreeze:water mix to one with added antifreeze.
Consult a dealer for more information.
n
Adding Coolant
1. Make sure the engine and radiator are cool.
2. Turn the radiator cap 1/8 turn counterclockwise and relieve any
pressure in the coolant system.
3. Push down and turn the radiator cap counterclockwise to remove it.
4. The coolant level should be up to the base of the filler neck. Add coolant
if it is low.
5. Put the radiator cap back on, and tighten it fully.
Removing the radiator cap while the engine is hot can cause the coolant to
spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiator
cap.
Pour the fluid slowly and carefully so you do not spill any. Clean up any
spills immediately; they can damage components in the engine
compartment.
Checking the Battery
The battery condition is monitored by the sensor on the negative terminal. If
there is a problem with the sensor, a warning message appears on the Driver
Information Interface. Have your vehicle checked by a dealer.
The battery gives off explosive hydrogen gas during normal operation.
A spark or flame can cause the battery to explode with enough force to kill or
seriously hurt you.
When conducting any battery maintenance, wear protective clothing and a
face shield, or have a skilled technician do it.
WARNING: Battery posts, terminals, and related accessories contain lead and
lead compounds. Wash your hands after handling.
MAINTENANCE
148 |
Window Washer Fluid
Check the amount of window washer fluid
by looking at the reservoir. Fill the reservoir
if it is low. Pour the washer fluid carefully.
Do not overflow the reservoir.
Canadian Models Only
If the washer fluid is low, a message appears on the Driver Information
Interface.
Brake/Clutch
*1
Fluid
The fluid level should be between the MIN and MAX marks on the side of the
tank. We recommend using Honda Heavy Duty Brake Fluid DOT 3.
Use the same fluid for both the brakes and clutch
*1
.
Pour the fluid carefully.
Manual Transmission Models
The brake fluid reserve tank is also used for your vehicle’s clutch fluid. As long
as you keep the brake fluid level as instructed above, there is no need for
checking the clutch fluid level.
If the fluid level is at or below the MIN mark, have a dealer inspect for leaks or
worn brake pads as soon as possible.
Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system
and can cause extensive damage.
*1 - If equipped
MAINTENANCE
| 149