Engine Oil
u
Changing Engine Oil, Cleaning Strainer Screen
77
continued
Ma
intenance
3.
Place your scooter on its centre stand on
a firm, level surface.
4.
Place a drain pan under the drain bolt and
oil plug.
5.
Remove the oil fill cap/dipstick, drain bolt
and sealing washer to drain the oil.
6.
Remove the oil plug, O-ring, spring and
oil strainer screen and let the remaining
oil drain out.
u
Discard the oil at an approved
recycling centre.
7.
Clean the oil strainer screen.
8.
Check that the oil strainer screen and
sealing rubber are in good condition.
9.
Replace the O-ring and apply a thin coat
of engine oil to the new O-ring before
installing it.
10.
Install the oil strainer screen, spring and oil
plug and tighten.
Torque:
20 N·m (2.0 kgf·m, 15 lbf·ft)
Sealing washer
Drain bolt
Spring
Oil plug
O-ring
Oil strainer screen
19 ACB125CBT CBF (IN PH) 32K60A100.book Page 77 Monday, April 2, 2018 1:48 PM
Содержание ACB125CBF 2019
Страница 1: ......
Страница 27: ...23 Operation Guide 19 ACB125CBT CBF IN PH 32K60A100 book Page 23 Monday April 2 2018 1 48 PM...
Страница 129: ......