Honda 450X 2005, Руководство пользователя и соревновательное пособие, Страница: 20 / 180

Starting & Stopping the Engine
Flooded Engine
Starting the engine after a stall during riding or
after a fall:
1. Shift the transmission into neutral.
2. Pull the hot start lever all the way in and start
the engine. (Do not open the throttle).
3. As soon as the engine starts, release the hot
start lever.
Starting a flooded engine:
(Using the start button)
1. Do not use the choke.
2. Shift the transmission into neutral with the
throttle fully opened.
3. Pull the clutch and hot start levers all the way
in and depress the start button for 5 seconds.
If the engine starts, quickly close the throttle,
then open it slightly if idling is unstable. If the
engine does not start, wait 10 seconds, and
then follow the starting the engine.
4. As soon as the engine starts, release the hot
start lever.
(Using the kickstarter)
1. Do not use the choke.
2. Shift the transmission into neutral with the
throttle fully opened, repeat kickstarter
operation approximately 10 times very slowly
to discharge excessive fuel from the engine.
Close the throttle.
3. Pull the hot start lever all the way in and start
the engine. (Do not open the throttle.)
4. As soon as the engine starts, release the hot
start lever.
16
Basic Operating Instructions
How to Stop the Engine
(1)
(2)
(1) throttle (2) engine stop button
Normal Engine Stop
1. Shift the transmission into neutral.
2. Turn the fuel valve OFF.
3. Lightly open the throttle (1) 2 – 3 times, and
then close it.
4. Depress the engine stop button (2) until the
engine stops completely.
Failure to close the fuel valve may cause the
carburetor to overflow, result in hard starting.
Emergency Engine Stop
To stop the engine in an emergency, depress the
engine stop button.
Hot Engine Starting
1. Pull the hot start lever (3) all the way in and
start the engine following step 4 under
“Normal Air Temperature.”
2. As soon as the engine starts, release the hot
start lever.
(3)
(3) hot start lever